Authorized Distributor Worldwide Distribution Competitive Prices Fast Shipping from Germany
11 manufacturers
All Manufacturers More Manufacturers on Request

1404644 - SACC-M12FST-3PECON-PG11-M – Phoenix Contact

GTIN / EAN: 4046356707756 Part Number: 1404644 Part Type: SACC-M12FST-3PECON-PG11-M Manufacturer: Phoenix Contact Power connector
Part Number
1404644 - SACC-M12FST-3PECON-PG11-M
Availability
Available
Description
Power connector, Power, 4-position, unshielded, Socket straight M12, coding: T, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg11, external cable diameter 8 mm ... 10 mm, For direct current up to 12 A/63 V
Product type Circular connector (cable-side)
Connection method Screw connection
Nominal current 12 A
Nominal voltage UN 63 V
Number of positions 4
Degree of protection IP67
Data Sheet Download

Technical Data

56 values
Notes (2)
General Strip 22 mm off the cable sheath, strip 7 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Length of conductor with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm.
Assembly note NOTE: Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties.
Mounting (1)
Assembly note The wires can be connected both with ferrules and without ferrules
Product properties (10)
Product type Circular connector (cable-side)
Application Energy supply
Number of positions 4
No. of cable outlets 1
Shielded No
Coding T
Cable outlet straight
Pg screw connection Pg11

Insulation characteristics

Overvoltage category III
Degree of pollution 3
Dimensions (6)
Width 20 mm
Height 20 mm
Length 60.4 mm
Wrench size, union nut 19 mm

External dimensions

Outside diameter 8 … 10 mm

Housing

Diameter housing 20 mm
Material specifications (8)
Flammability rating according to UL 94 V0
Seal material Viton, NBR
Material of grip body PA
Contact material CuZn
Contact surface material Au
Contact carrier material PA
Material for screw connection Zinc die-cast, nickel-plated
Connection data (11)

Conductor connection

Connection method Screw connection
Connection cross section 0.75 … 1.5 mm², 0.75 … 2.5 mm²
Connection cross section AWG 14 … 18, 16 … 18
Stripping length of the individual wire 5 mm
Tightening torque 0.4 Nm, 1.5 … 2 Nm, 0.2 Nm
Electrical properties (6)
Rated surge voltage 1.5 kV
Contact resistance ≤ 3 mΩ
Insulation resistance ≥ 10 GΩ
Nominal voltage UN 63 V
Nominal current 12 A
Mechanical properties (1)

Mechanical data

Insertion/withdrawal cycles ≥ 100
Connector (4)

Connection 1

Head design Socket
Head cable outlet straight
Head thread type M12
Coding T
Cable/line (2)
Signal type/category Power
Stripping length of the individual wire 5 mm
Environmental and real-life conditions (2)

Ambient conditions

Degree of protection IP67
Ambient temperature (operation) (male connector/female connector) -40 … 85 °C
Standards and regulations (2)

M12

Standard designation M12 connector
Standards/specifications IEC 61076-2-111
Further Data (1)
knurl material Zinc die-cast, nickel-plated, cable gland Pg11

Commercial Data

Packing Unit 1
Minimum Order Quantity 1
Unit of Measure pcs
Net Weight 24.84 g
Gross Weight 28.2 g
Dimensions (H × W × D) 22 × 25 × 135 mm
Country of Origin DE
Customs Tariff Number 85366990
RoHS Compliant Yes
ECCN N
Export List Number DE N
Packing Type CT
Package Can Be Opened Yes
Production Type From Stock
Product group Sensor-Acuator Cable
ETIM Class EC002635
eCl@ss 27440116

Downloads

1 file
Data Sheet 197 KB Download

Accessories

9 products

A 1,5 - 7

Part Number 3200263

TSD 04 SAC

Part Number 1208429

Similar Products

8 products
Copied
Added to the Inquiry List · Part Number
Back to top